AIX Servers in LVS/DR and LVS/TUN Clusters

From LVSKB
Revision as of 17:18, 10 April 2010 by Bmontarges (Talk | contribs) (Disable ARP for VIP)

Jump to: navigation, search

Introduction

In the AIX operating systems, ip addresses configured on the loopback interface will not participate the ARP protocol. Tested ok on AIX 6.1, sould works from AIX 5L

Disable ARP for VIP

To know : It is possible to disable arp on a real interface via noarp option on setup If a real interface is set up with arp on, you cannot add a inet alias on it whitout arp reply... The AIX "Virtual IP Address Interface" implementation allow you to add a virtual interface (not only an alias) that is not arp-able


In LVS/DR clusters, we can disable ARP for VIP on AIX as follows:

smitty inet
select "Add de Virtual IP Address Interface"
under setup screen, specify :
address : VIP/32 (dotted decimal)
netmask : 255.255.255.255 
interface name : vi1 (or what you want)
activate interface : yes
real intarface to attach: lo (select the loopback, smitty failed to attach on a etherchannel int. in my case)


From smitty, ODM should be updated for persistence after reboot. I didn't restart the system yet. I will confirm asap. I will also add the corresponding cmd line

That(s it. Sorry for wiki style and english. I work on it too... --Bmontarges 01:18, 11 April 2010 (CST)