Difference between revisions of "Building Windows Media Service Cluster using LVS"

From LVSKB
Jump to: navigation, search
(→‎Conclusion)
(→‎Configuration Example)
 
(One intermediate revision by one other user not shown)
Line 34: Line 34:
 
<li>iptables -t mangle -A PREROUTING -i $EXT_IF -p udp -s 0/0 -d $EXT_IP --dport 1024:5000 -j MARK --set-mark $WMS_MARK</li></ul>
 
<li>iptables -t mangle -A PREROUTING -i $EXT_IF -p udp -s 0/0 -d $EXT_IP --dport 1024:5000 -j MARK --set-mark $WMS_MARK</li></ul>
  
−
<br/>(<b><em>example:</em></b>  iptables -t mangle -A PREROUTING -i eth0 -p tcp -s 0/0 -d 1.2.3.4 --dport 554 -j MARK --set-mark WMSLVS1)<br/><br/>
+
<br/>(<b><em>example:</em></b>  iptables -t mangle -A PREROUTING -i eth0 -p tcp -s 0/0 -d 1.2.3.4 --dport 554 -j MARK --set-mark 1)<br/><br/>
  
 
<br/>Next, we need to tell LVS to do the load balancing.  This can be done by doing the following, replacing <b>$WMS_MARK</b> and <b>$RSx_IP</b> with the appropriate mark that you chose above and your real server IPs:<br/><br/>
 
<br/>Next, we need to tell LVS to do the load balancing.  This can be done by doing the following, replacing <b>$WMS_MARK</b> and <b>$RSx_IP</b> with the appropriate mark that you chose above and your real server IPs:<br/><br/>
Line 55: Line 55:
 
* http://archive.linuxvirtualserver.org/html/lvs-users/2004-03/msg00176.html
 
* http://archive.linuxvirtualserver.org/html/lvs-users/2004-03/msg00176.html
 
* [http://www.microsoft.com/windows/windowsmedia/forpros/serve/firewall.aspx Firewall Information for Windows Media Services 9 Series]
 
* [http://www.microsoft.com/windows/windowsmedia/forpros/serve/firewall.aspx Firewall Information for Windows Media Services 9 Series]
 +
* http://archive.linuxvirtualserver.org/html/lvs-users/2004-03/msg00176.html
  
  

Latest revision as of 22:52, 6 December 2006

Introduction

Microsoft Windows Media Service uses uses two streaming media protocols to deliver content as a unicast stream to clients:

  • Real Time Streaming Protocol (RTSP)
  • Microsoft Media Server (MMS) protocol


Architecture

Configuration Example

In order for us to get this to work, we need to allow the following ports in:

  • 80 tcp (ONLY NEEDED IF YOU ARE SERVING STREAMS THROUGH HTTP)
  • 554 tcp/udp
  • 1755 tcp/udp
  • 1024-5000 udp


This can be done like so, replacing $EXT_IF and $EXT_IP with your appropriate interface and IP:

  • iptables -A INPUT -i $EXT_IF -p tcp -s 0/0 -d $EXT_IP --dport 1755 -j ACCEPT
  • iptables -A INPUT -i $EXT_IF -p tcp -s 0/0 -d $EXT_IP --dport 554 -j ACCEPT
  • iptables -A INPUT -i $EXT_IF -p udp -s 0/0 -d $EXT_IP --dport 554 -j ACCEPT
  • iptables -A INPUT -i $EXT_IF -p udp -s 0/0 -d $EXT_IP --dport 1024:5000 -j ACCEPT


(example: iptables -A INPUT -i eth0 -p tcp -s 0/0 -d 1.2.3.4 --dport 1755 -j ACCEPT)


Next, we need to take a group the packets by using the MANGLE table in iptables. To do that you would do the following, replacing $EXT_IF, $EXT_IP and $WMS_MARK with your appropriate interface, IP and mark that you would like to tag the packets with:

  • iptables -t mangle -A PREROUTING -i $EXT_IF -p tcp -s 0/0 -d $EXT_IP --dport 554 -j MARK --set-mark $WMS_MARK
  • iptables -t mangle -A PREROUTING -i $EXT_IF -p udp -s 0/0 -d $EXT_IP --dport 554 -j MARK --set-mark $WMS_MARK
  • iptables -t mangle -A PREROUTING -i $EXT_IF -p tcp -s 0/0 -d $EXT_IP --dport 1755 -j MARK --set-mark $WMS_MARK
  • iptables -t mangle -A PREROUTING -i $EXT_IF -p udp -s 0/0 -d $EXT_IP --dport 1755 -j MARK --set-mark $WMS_MARK
  • iptables -t mangle -A PREROUTING -i $EXT_IF -p udp -s 0/0 -d $EXT_IP --dport 1024:5000 -j MARK --set-mark $WMS_MARK


(example: iptables -t mangle -A PREROUTING -i eth0 -p tcp -s 0/0 -d 1.2.3.4 --dport 554 -j MARK --set-mark 1)


Next, we need to tell LVS to do the load balancing. This can be done by doing the following, replacing $WMS_MARK and $RSx_IP with the appropriate mark that you chose above and your real server IPs:

  • ipvsadm -D -f $WMS_MARK
  • ipvsadm -A -f $WMS_MARK -s rr -p 600
  • ipvsadm -a -f $WMS_MARK -r $RS1_IP:0 -m
  • ipvsadm -a -f $WMS_MARK -r $RS1_IP:0 -m


(example: ipvsadm -A -f WMSLVS1 -s rr -p 600)
(example: ipvsadm -a -f WMSLVS1 -r 10.10.10.1:0 -m)



Once you have completed these steps, you should have a working Windows Media Streaming Server LVS! Enjoy!

Conclusion

In the above configuration example you see that I am using Round-Robin (rr). This is not necessary, you can use any type you want. I have switched my personal LVS setup to use Weighted Least Connections (wlc).

References


LVS.png "Building Windows Media Service Cluster using LVS" is an LVS Example related stub. You can help LVSKB by expanding it
Retrieved from "https://kb.linuxvirtualserver.org/wiki?title=Building_Windows_Media_Service_Cluster_using_LVS&oldid=3884"