Difference between revisions of "Troubleshooting"

From LVSKB
Jump to: navigation, search
m (Introduction)
m
Line 1: Line 1:
 
== Introduction ==
 
== Introduction ==
  
In order to make troubleshooting easier, we need to understand the IP load balancing technology that we are using now in the cluster, and know the whole packet flow, such as how packets are received and sent out at the load balancer, and how packets are handled at real servers and sent out back to the clients.
+
In order to make troubleshooting easier, we need to understand the IP load balancing technology that we are using now in the cluster, and know the whole packet flow, such as how packets are received and sent out at the [[load balancer]], and how packets are handled at real servers and sent out back to the clients.
  
 
To know more information about IP load balacing technologies implemented in the IPVS, check
 
To know more information about IP load balacing technologies implemented in the IPVS, check
Line 8: Line 8:
 
* [[LVS/DR | Virtual Server via Direct Routing]]
 
* [[LVS/DR | Virtual Server via Direct Routing]]
  
Then, we can use some packet capture tools, such as [[ethereal]] and [[tcpdump]], to do troubleshooting at our cluster system. First, we can capture the load balanced traffic at both load balancer and real servers, in order to make sure that basic load balancing system works; Second, we can also capture packets of service monitoring among load balancers and real servers, to verify that cluster monitoring and high availability works as expected.
+
Then, we can use some packet capture tools, such as [[ethereal]] and [[tcpdump]], to do troubleshooting at our cluster system. First, we can capture the load balanced traffic at both [[load balancer]] and real servers, in order to make sure that basic load balancing system works; Second, we can also capture packets of service monitoring among load balancers and real servers, to verify that cluster monitoring and high availability works as expected.
  
 
== Load Balancer ==
 
== Load Balancer ==

Revision as of 16:39, 19 September 2005

Introduction

In order to make troubleshooting easier, we need to understand the IP load balancing technology that we are using now in the cluster, and know the whole packet flow, such as how packets are received and sent out at the load balancer, and how packets are handled at real servers and sent out back to the clients.

To know more information about IP load balacing technologies implemented in the IPVS, check

Then, we can use some packet capture tools, such as ethereal and tcpdump, to do troubleshooting at our cluster system. First, we can capture the load balanced traffic at both load balancer and real servers, in order to make sure that basic load balancing system works; Second, we can also capture packets of service monitoring among load balancers and real servers, to verify that cluster monitoring and high availability works as expected.

Load Balancer

Real Server